WRIGHT TOOL COMPANY, LLC

SANDER, DISK, PNEUMATIC, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.

WRENCH, ADJUSTABLE: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEAD FORMERLY 1B107.9 CAT 21 WRENCH, CROWFOOT FORMERLY 1B107.21 CAT 39 OPEN END WRENC

TOOL BOX,PORTABLE

DIE, RETHREADING: TYPE/STYLE: SOLID HEXAGON NUT THREAD SZ/SERIES: 3/4-10 UNC THREAD PITCH DIAMETERS: 0.6744/ 0.6850 INCH WIDTH ACROSS FLATS: 1.438 INCH (+0.012/ -0.016 INCH) THICKNESS: 0.75 INCH (+/- 0.0625 INCH) THREAD DIRECTION: RIGHT-HAND MATERIAL

BAR, WRECKING: TYPE II: NONSTRUCK NAIL-PULLER BAR CLASS 2: RIPPING/WRECKING OVERALL LENGTH: 30 INCHES BAR STOCK SZ: 3/4 INCH MATERIAL: STEEL FEATURES: GOOSENECK (PARTIAL DESCRIPTION)

TAPE, MEASURING: TAPE WIDTH: 1/2 INCH WINDING METHOD: PULL-PUSH MEASURING CAPACITY: 6 FEET TAPE SMALLEST GRADUATION UNIT: 1/16 INCH AND 1MM TAPE MATERIAL: STEEL FEATURES: BUTT END; READS LEFT TO RIGHT (PARTIAL DESCRIPTION)

HAMMER, PNEUMATIC, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.

HOSE,NONMETALLIC

POLISHER,PORTABLE,E

HANDLE, MAGNETIC: MAX LIFT: 600 POUNDS MAX MAGNETIC PENETRATION: 1/8 INCH SZ: 6 X 7-3/5 INCHES CAPACITY: 8 GAUGE WEIGHT: 10 POUNDS (PARTIAL DESCRIPTION)

KNIFE, POCKET: OPEN LENGTH: 8-1/4 INCHES CLOSEDLENGTH: 4-7/8 INCHES BLADE LENGTH: 3-1/2 INCHESBLADE TYPE: MODIFIED SHEEPSFOOT, PARTIALLY SERRATED HANDLE COLOR: BLACKBLADE MATERIAL: STAINLESS STEEL HANDLE MATERIAL: PLASTIC FEATURES: SATIN FINISH; THUM

WRENCH, TORQUE

KNIFE, POCKET: OPEN LENGTH: 7-7/8 INCHES MINIMUM AND 8-1/8 INCHES MAX CLOSED LENGTH: 4-1/2 INCHES MINIMUM AND 4-3/4 INCHES MAX BLADE LENGTH: 3-1/2 INCHES BLADE STYLE: MODIFIED SHEEPSFOOT; PARTIALLY SERRATED BLADE QUANTITY: 1 HANDLE MATERIAL: SYNTHETI

KNIFE, POCKET: OVERALL LENGTH: 8 INCHES CLOSED LENGTH: 4-3/4 INCHES BLADE LENGTH: 3-1/2 INCHES BLADE QUANTITY: 1 LOCK MECHANISM: LOCK-BACK BLADE STYLE: CLIP POINT; PARTIALLY SERRATED HANDLE COLOR: BLACK BLADE MATERIAL: STAINLESS STEEL HANDLE MATERIAL

KNIFE, POCKET: OPEN LENGTH: 7-7/8 INCHES MINIMUM AND 8-1/8 INCHES MAX CLOSED LENGTH: 4-1/2 INCHES MINIMUM AND 4-3/4 INCHES MAX BLADE LENGTH: 3-1/2 INCHES BLADE STYLE: MODIFIED SHEEPSFOOT; PARTIALLY SERRATED BLADE QUANTITY: 1 HANDLE MATERIAL: SYNTHETI

WHEEL, MEASURING: OVERALL LENGTH: 44 INCHES FOLDED LENGTH: 23 INCHES WHEEL CIRCUMFERENCE: 36 INCHES MATERIAL, TREAD: RUBBER MATERIAL: STEEL FEATURES: ADDS; RESET TO ZERO; MAX DISTANCE: 99,999 FEET (PARTIAL DESCRIPTION)

CUTTER,BOLTAIWAN.AIWAN.AIWAN.

SHEARS, STRAIGHT TRIMMERS: IAW GSA PURCHASE DESCRIPTION 5110-01-278-4823 (PARTIAL DESCRIPTION)

CALIPER, MICROMETER, INSIDE: CONFIGURATION: ROD AND SLEEVE RANGE: 2 TO 12 INCH GRADUATION: 0.001 INCH NUMBER OF RODS: TEN (10) SOLID, 1/4 INCH DIAMETER MATERIAL: HIGH GRADE TOOL STEEL OR ALLOY TOOL STEEL MICROMETER HEAD ERROR: 0.0002 INCH MAX (PERMIS

TOOL KIT, OFFICE: - SEE ATTACHED DOCUMENT FOR DETAIL.

DRILL-DRIVER,ELECTR DRIVE TYPE: STRAIGHT SPEED:2 VARIABLE SPEED RANGES:0 TO 500/0 TO 1800 RPM(+/- 10%) OVERALL LENGTH:10.250 MAX CURRENT TYPE: DC TORQUE CAPACITY: 450 INCH-POUNDS (+/- 10 INCH-POUNDS) CLUTCHSETTINGQUANTITY: 20 (+/- 2) HANDLE TYPE: PIS

KNIFE, POCKET: OPEN LENGTH: 7-7/8 INCHES MINIMUM AND 8-1/8 INCHES MAX CLOSED LENGTH: 4-1/2 INCHES MINIMUM AND 4-3/4 INCHES MAX BLADE LENGTH: 3-1/2 INCHES BLADE STYLE: MODIFIED SHEEPSFOOT; PARTIALLY SERRATED BLADE QUANTITY: 1 HANDLE MATERIAL: SYNTHETI

KNIFE, POCKET: BLADE QUANTITY: 1 BLADE TYPE: STRAIGHT EDGE BLADE LENGTH: 3-13/16 INCHES; TOLERANCE: 1/8 INCH BLADE MATERIAL: H1 STEEL KNIFE LENGTH OPEN: 8-5/8 INCHES; TOLERANCE: 1/8 INCH KNIFE LENGTH CLOSED: 4-15/16 INCHES; TOLERANCE: 1/8 INCH KNIFE

CARRIER, TOOL: - SEE ATTACHED DOCUMENT FOR DETAIL.

WRENCH, SPANNER: IAW U.S. ARMY ELECTRONICS RESEARCH AND DEVELOPMENT COMMAND, NIGHT VISION AND ELECTRO-OPTICS LABORATORY DRAWING NUMBER 5007644 DATED MAY 9, 1986 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)