LYEV, LLC

CASE, RETAINING RING PLIERS SET: WIDTH: 12-1/2 INCHES DEPTH: 16-1/4 INCHES HEIGHT: 4-1/2 INCHESTOOL QUANTITY ACCOMMODATED: 12 MATERIAL: PLASTIC(PARTIAL DESCRIPTION)

SLIDE HAMMER, GROUND ROD: - SEE ATTACHED DOCUMENT FOR DETAIL.

CALIPER, DIAL: MINIMUM DIAL GRADUATION UNIT: 0.001 INCH INSIDE JAW DEPTH: 5/8 INCH OUTSIDE JAW DEPTH: 1.5 INCH MEASUREMENT RANGE: 0 INCH, MINIMUM; 6 INCH, MAX FINE ADJUSTMENT FEATURE: INCLUDED NIB CLOSED POSITION WIDTH: 0.3 INCH ACCURACY: 0.001 INCH

BENDER, TUBE, HAND: BEND RADIUS: 180 DEGREE UNIT TYPE: TRIPLE HEAD LEVER ACTUATED HANDLE TYPE: CUSHION GRIPS TUBE OUTSIDE DIAMETER (INCHES) RADIUS TO CENTER OF TUBE (INCHES) 3/16 11/16 1/4 11/16 3/8 1-1/8 1/2 1-1/2 MATERIAL: LIGHTWEIGHT DIE-CAST ALUM

SAW,HAND,METAL CUTT: STYLE: JAB SAW BLADE QUANTITY: 3 BLADE SZS: 14, 18, AND 24 TEETH PER INCH HANDLE MATERIAL: PLASTIC FEATURES: CONTOURED SCREWDRIVER HANDLE; SAW HOLDER WITH KNURLED KNOB (PARTIAL DESCRIPTION)

WRENCH SET,COMBINAT AS954H WRENCHES, HAND,TWELVE POINT, HIGH STRENGTH, THIN WALL TYPE II:WRENCHES, BOX CLASS 4: COMBINATION, BOX AND OPEN END WRENCH STYLE C: REGULAR LENGTH COMPONENT QUANTITY: 15 WRENCH OPENINGS: THIS SET SHALL CONSIST OF ONE (1) EAC

CUTTER, WIRE, HAND: TYPE: CONCERTINA OVERALL LENGTH: 8-1/2 INCHES CLOSED HANDLE WIDTH: 2-3/16 INCHES OPEN HANDLE WIDTH:5-1/2 INCHES WIRE DIAMETER ACCOMMODATED: 5/32 INCH CUTTING FORCE: 1,200POUNDS GRIP FORCE: 75 POUNDS CUTTER SLOT QUANTITY: 2 SHEATH

TAPE, MEASURING (DRESSMAKERS) 1/2 INCH TO 3/4 INCH WIDTH, 72 INCH LENGTH, 1/8 INCH AND 1 MILLIMETER INCREMENTS. CLOTH, SYNTHETIC RESIN OR VINYLCOATED.

FASTENER TAPE,HOOK

KNIFE,HUNTING

TAPE,TEXTILE:PLAIN WEAVE,FLAT,POLYESTER TEXTILE TAPE. COLOR-WHITE,WEIGHT-0.38 OZ PER YARD, WIDTH-2 IN, LENGTH-167 YARD ROLL.

FASTENER TAPE,HOOK

TAPE,TEXTILE:PLAIN WEAVE,FLAT,POLYESTER TEXTILE TAPE. COLOR-WHITE,WEIGHT-0.38 OZ PER YARD, WIDTH-2 IN, LENGTH-167 YARD ROLL.

RULE, CIRCUMFERENCE: OVERALL LENGTH: 48 INCHES BLADE WIDTH: 1-1/4 INCHES THICKNESS: 1/16 INCH UPPER EDGE GRADUATION UNITS: 1/16 INCH LOWER EDGE GRADUATION UNITS: 1/8 INCH, UP TO 150 CIRCUMFERENCE INCHES MATERIAL: STEEL FEATURES: SATIN FINISH; TINNER

JACK, HYDRAULIC, HAND;

CALIPER, DIAL: MINIMUM DIAL GRADUATION UNIT: 0.001 INCH INSIDE JAW DEPTH: 5/8 INCH OUTSIDE JAW DEPTH: 1.5 INCH MEASUREMENT RANGE: 0 INCH, MINIMUM; 6 INCH, MAX FINE ADJUSTMENT FEATURE: INCLUDED NIB CLOSED POSITION WIDTH: 0.3 INCH ACCURACY: 0.001 INCH

DIE AND TAP SET,THREAD CUTTING SNAP-ON INC P/N:TDTDM500

SLIDE HAMMER, GROUND ROD: - SEE ATTACHED DOCUMENT FOR DETAIL.

PULLER, MECHANICAL: 13-TON CAPACITY REACH LENGTH: 15-1/4 INCHES MAX SPREAD RANGE: 15-1/2 INCHESMAX SNAP-ON PN OTC1040 (PARTIAL DESCRIPTION)

STENCIL SET 2 IN

WRENCH, IMPACT, PNEUMATIC: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.4 2005. SQUARE DRIVE SZ: 3/4 INCH HANDLE TYPE: PISTOL GRIP CAPACITY: 700 FOOT-POUNDS MINIMUM SPECIAL FEATURES: WORKING TORQUE RANGE - 100 TO 500 FOOT-POUNDS AVERA

STRIPPER,WIRE,HAND

KNIFE,HUNTING

HOLDER AND INSERTED HAMMER FACE SET: COMPONENT QUANTITY: 7 HANDLE LENGTH: 10 INCHES HEAD DIAMETER: 1-1/2 INCHES HANDLE MATERIAL: FIBERGLASS FEATURES: DEAD BLOW; PLASTIC CASE; NON-SLIP GRIP SOFT HAMMER HEAD HEAD WEIGHT: 1-1/2 OUNCES MEDIUM HAMMER HEAD

CLAMP, SPRING: JAW CAPACITY: 2 INCHES OVERALL LENGTH: 6 INCHES REACH: 2 INCHES MATERIAL: STEEL FEATURES: SPRING OPERATED; PLAIN HANDLES (PARTIAL DESCRIPTION)